# Cam Clay Model

**URL:** <https://discourse.opengeosys.org/t/cam-clay-model/281>\
**Category:** ogs-devs\
**Tags:** mailing-list\
**Created:** [May 8, 2017, 8:13pm UTC](https://discourse.opengeosys.org/t/cam-clay-model/281 "2017-05-08T20:13:14Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mohammad\_Islam](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/m/5e9695/32.png) [@Mohammad\_Islam](https://discourse.opengeosys.org/u/Mohammad_Islam)\
**Post date:** [May 8, 2017, 8:13pm UTC](https://discourse.opengeosys.org/t/cam-clay-model/281/1 "2017-05-08T20:13:14Z")

</div>

Hi All,

Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.

> > > > Page:142, Section 7.3.1 to 145

Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.

> > > > Page :133, Section 7.3.1

Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

> > > Page 180, Section 9.2

[https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp)

In addition, does source code of the Cam Clay model available in the Open Geosys?

Thanks in advance,

Regards,

Mohammad

_Dr. Mohammad Nurul Islam_

ORISE PostdoctoralResearcher

The National EnergyTechnology Laboratory (NETL)

US Department of Energy (DoE)

NETL-PGH, 84/309

Visiting Scholar

Civil and Environmental Engineering

University of Pittsburgh, USA

736 Benedum Hall,

3700 O’Hara St, Pittsburgh, PA 15213

Mobile: 1-412-3158889

Email: mni4@pitt.edu

---

<div class="post-metadata">

**Author:** ![bilke](https://discourse.opengeosys.org/user_avatar/discourse.opengeosys.org/bilke/32/868_2.png) [@bilke](https://discourse.opengeosys.org/u/bilke)\
**Post date:** [May 9, 2017, 6:14am UTC](https://discourse.opengeosys.org/t/cam-clay-model/281/2 "2017-05-09T06:14:28Z")

</div>

Dear Mohammed,

you can find the source code here: [https://github.com/ufz/ogs5](https://github.com/ufz/ogs5)

And the benchmarks here: [https://github.com/ufz/ogs5-benchmarks](https://github.com/ufz/ogs5-benchmarks)

Best,

Lars

> **···**
>
> On 8 May 2017, at 22:13, Mohammad Islam wrote:
> 
> > Hi All,
> 
> > Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem
> 
> > 
> 
> > Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.
> 
> > > > > > Page:142, Section 7.3.1 to 145
> 
> > Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.
> 
> > > > > > Page :133, Section 7.3.1
> 
> > Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.
> 
> > > > > Page 180, Section 9.2
> 
> > [https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp)
> 
> > In addition, does source code of the Cam Clay model available in the Open Geosys?
> 
> > Thanks in advance,
> 
> > 
> 
> > Regards,
> 
> > Mohammad
> 
> > _Dr. Mohammad Nurul Islam_
> 
> > 
> 
> > ORISE PostdoctoralResearcher
> 
> > The National EnergyTechnology Laboratory (NETL)
> 
> > US Department of Energy (DoE)
> 
> > NETL-PGH, 84/309
> 
> > 
> 
> > Visiting Scholar
> 
> > Civil and Environmental Engineering
> 
> > University of Pittsburgh, USA
> 
> > 736 Benedum Hall,
> 
> > 3700 O’Hara St, Pittsburgh, PA 15213
> 
> > Mobile: 1-412-3158889
> 
> > Email: mni4@pitt.edu
> 
> > 
> 
> > 
> 
> > 
> 
> > 
> 
> > 
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “ogs-devs” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [ogs-devs+unsubscribe@googlegroups.com](mailto:ogs-devs+unsubscribe@googlegroups.com).
> > 
> > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).

---

<div class="post-metadata">

**Author:** ![Mohammad\_Islam](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/m/5e9695/32.png) [@Mohammad\_Islam](https://discourse.opengeosys.org/u/Mohammad_Islam)\
**Post date:** [May 9, 2017, 2:20pm UTC](https://discourse.opengeosys.org/t/cam-clay-model/281/3 "2017-05-09T14:20:23Z")

</div>

Dear Lars,

Thank you for your kind reply.

I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm\_cc\_tri\_s.\*\*. But, did not find yet the Cam Clay model source code. In ogs6, under “MaterialLib\>\> SolidModels\>\>Ehlers” is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.

I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That’s why I am interested, how it is incorporated in OGS?

Regards,

Mohammad

> **···**
>
> On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:
> 
> > Dear Mohammed,
> 
> > you can find the source code here: [https://github.com/ufz/ogs5](https://github.com/ufz/ogs5)
> 
> > And the benchmarks here: [https://github.com/ufz/ogs5-benchmarks](https://github.com/ufz/ogs5-benchmarks)
> 
> > Best,
> > 
> > Lars
> 
> > On 8 May 2017, at 22:13, Mohammad Islam wrote:
> 
> > > Hi All,
> 
> > > Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem
> 
> > >
> 
> > > Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.
> 
> > > > > > > Page:142, Section 7.3.1 to 145
> 
> > > Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.
> 
> > > > > > > Page :133, Section 7.3.1
> 
> > > Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.
> 
> > > > > > Page 180, Section 9.2
> 
> > > [https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp)
> 
> > > In addition, does source code of the Cam Clay model available in the Open Geosys?
> 
> > > Thanks in advance,
> 
> > >
> 
> > > Regards,
> 
> > > Mohammad
> 
> > > _Dr. Mohammad Nurul Islam_
> 
> > >
> 
> > > ORISE PostdoctoralResearcher
> 
> > > The National EnergyTechnology Laboratory (NETL)
> 
> > > US Department of Energy (DoE)
> 
> > > NETL-PGH, 84/309
> 
> > >
> 
> > > Visiting Scholar
> 
> > > Civil and Environmental Engineering
> 
> > > University of Pittsburgh, USA
> 
> > > 736 Benedum Hall,
> 
> > > 3700 O’Hara St, Pittsburgh, PA 15213
> 
> > > Mobile: 1-412-3158889
> 
> > > Email: mn…@pitt.edu
> 
> > >
> 
> > >
> 
> > >
> 
> > >
> 
> > >
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “ogs-devs” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [ogs-devs+u...@googlegroups.com](mailto:ogs-devs+u...@googlegroups.com).
> > > 
> > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).

---

<div class="post-metadata">

**Author:** ![wenqing.wang](https://discourse.opengeosys.org/user_avatar/discourse.opengeosys.org/wenqing.wang/32/417_2.png) [@wenqing.wang](https://discourse.opengeosys.org/u/wenqing.wang)\
**Post date:** [May 10, 2017, 7:21am UTC](https://discourse.opengeosys.org/t/cam-clay-model/281/4 "2017-05-10T07:21:54Z")

</div>

You can find it in rf\_msp\_new.cpp

> **···**
>
> On 05/09/2017 04:20 PM, Mohammad Islam wrote:
> 
> > Dear Lars,  
> > Thank you for your kind reply.
> > 
> > I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm\_cc\_tri\_s.\*\*. But, did not find yet the Cam Clay model source code. In ogs6, under "MaterialLib\>\> SolidModels\>\>Ehlers" is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.
> > 
> > I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That's why I am interested, how it is incorporated in OGS?
> > 
> > Regards,  
> > Mohammad
> > 
> > On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;Dear Mohammed,
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;you can find the source code here: [GitHub - ufz/ogs5: OpenGeoSys THM/C simulator version 5](https://github.com/ufz/ogs5)
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;And the benchmarks here: [GitHub - ufz/ogs5-benchmarks](https://github.com/ufz/ogs5-benchmarks)  
> > &nbsp;&nbsp;&nbsp;&nbsp;\<[https://github.com/ufz/ogs5-benchmarks&gt](https://github.com/ufz/ogs5-benchmarks&gt);
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;Best,  
> > &nbsp;&nbsp;&nbsp;&nbsp;Lars
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;On 8 May 2017, at 22:13, Mohammad Islam wrote:
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Hi All,  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Can any one provide a reference example of the bench mark  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;problem for the Cam Clay Model used in Open GeoSys? I found  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;following references:, but I am looking example of those problem
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S.  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(2016). "Thermo-Hydro-Mechanical-Chemical Processes in  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Fractured Porous Media: Modelling and Benchmarking  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Benchmarking Initiatives." Springer.
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\>\>\>\> Page:142, Section 7.3.1 to 145
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015).  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"Thermo-Hydro-Mechanical-Chemical Processes in Fractured  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Porous Media: Modelling and Benchmarking Closed-Form  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Solutions." Springer.
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\>\>\>\> Page :133, Section 7.3.1
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010)  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;“Thermo-Hydro-Mechanical-Chemical Processes in Fractured  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Porous Media Benchmarks and Examples” Lecture Notes in  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Computational Science and Engineering, Springer.
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\>\>\> Page 180, Section 9.2
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp)  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\<[https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp&gt](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp&gt);
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;In addition, does source code of the Cam Clay model available  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;in the Open Geosys?
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Thanks in advance,
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Regards,
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Mohammad
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;/Dr. Mohammad Nurul Islam/
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ORISE PostdoctoralResearcher
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The National EnergyTechnology Laboratory (NETL)
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;US Department of Energy (DoE)
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;NETL-PGH, 84/309
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Visiting Scholar
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Civil and Environmental Engineering
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;University of Pittsburgh, USA
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;736 Benedum Hall,
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;3700 O'Hara St, Pittsburgh, PA 15213
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Mobile: 1-412-3158889
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Email: mn...@pitt.edu \<javascript:\>
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-- You received this message because you are subscribed to the  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Google Groups "ogs-devs" group.  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;To unsubscribe from this group and stop receiving emails from  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;it, send an email to ogs-devs+u...@googlegroups.com \<javascript:\>.  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout)  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\<[https://groups.google.com/d/optout&gt;\](https://groups.google.com/d/optout&gt;%5C).
> > 
> > --  
> > You received this message because you are subscribed to the Google Groups "ogs-devs" group.  
> > To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+unsubscribe@googlegroups.com \<mailto:ogs-devs+unsubscribe@googlegroups.com\>.  
> > For more options, visit [https://groups.google.com/d/optout\](https://groups.google.com/d/optout%5C).

---

<div class="post-metadata">

**Author:** ![Mohammad\_Islam](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/m/5e9695/32.png) [@Mohammad\_Islam](https://discourse.opengeosys.org/u/Mohammad_Islam)\
**Post date:** [May 10, 2017, 2:24pm UTC](https://discourse.opengeosys.org/t/cam-clay-model/281/5 "2017-05-10T14:24:57Z")

</div>

Dear Wang,

Thank you very much.

Regards,

Mohammad

> **···**
>
> On Wednesday, 10 May 2017 03:21:57 UTC-4, Wenqing Wang wrote:
> 
> > You can find it in rf\_msp\_new.cpp
> > 
> > ```
> > On 05/09/2017 04:20 PM, Mohammad Islam wrote:
> > 
> > ```
> 
> > > ```
> > > Dear Lars,
> > > 
> > > ```
> 
> > > Thank you for your kind reply.
> 
> > >
> 
> > > ```
> > > I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm_cc_tri_s.**. But, did not find yet the Cam Clay model source code. In ogs6, under "MaterialLib>> SolidModels>>Ehlers" is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That's why I am interested, how it is incorporated in OGS?
> > > 
> > > ```
> 
> > >
> 
> > > Regards,
> 
> > > Mohammad
> 
> > >
> 
> > >
> 
> > >
> 
> > > ```
> > > On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:
> > > 
> > > ```
> 
> > > > Dear Mohammed,
> 
> > > > you can find the source code here: [https://github.com/ufz/ogs5](https://github.com/ufz/ogs5)
> 
> > > > And the benchmarks here: [https://github.com/ufz/ogs5-benchmarks](https://github.com/ufz/ogs5-benchmarks)
> 
> > > > Best,
> > > > 
> > > > ```
> > > > Lars
> > > > 
> > > > ```
> 
> > > > ```
> > > > On 8 May 2017, at 22:13, Mohammad Islam wrote:
> > > > 
> > > > ```
> 
> > > > > Hi All,
> 
> > > > > ```
> > > > > Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > ```
> > > > > Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). "Thermo-Hydro-Mechanical- Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives." Springer.
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > >>>> Page:142, Section 7.3.1 to 145
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). "Thermo-Hydro-Mechanical- Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions." Springer.
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > >>>> Page :133, Section 7.3.1
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical- Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > >>> Page 180, Section 9.2
> > > > > 
> > > > > ```
> 
> > > > > [https://svn.ufz.de/ogs/wiki/public/doc-auto/by\_ext/msp/S\_plasticity#Mm\_cc\_tri\_s.msp](https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp)
> 
> > > > > ```
> > > > > In addition, does source code of the Cam Clay model available in the Open Geosys?
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > Thanks in advance,
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > Regards,
> 
> > > > > Mohammad
> 
> > > > > - 
> > > > > 
> > > > > ```
> > > > > Dr. Mohammad Nurul Islam*
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > ```
> > > > > ORISE PostdoctoralResearcher
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > The National EnergyTechnology Laboratory (NETL)
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > US Department of Energy (DoE)
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > NETL-PGH, 84/309
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > ```
> > > > > Visiting Scholar
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > Civil and Environmental Engineering
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > University of Pittsburgh, USA
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > 736 Benedum Hall,
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > 3700 O'Hara St, Pittsburgh, PA 15213
> > > > > 
> > > > > ```
> 
> > > > > ```
> > > > > Mobile: 1-412-3158889
> > > > > 
> > > > > ```
> 
> > > > > Email: mn…@pitt.edu
> 
> > > > >
> 
> > > > >
> 
> > > > >
> 
> > > > >
> 
> > > > >
> 
> > > > > –
> > > > > 
> > > > > ```
> > > > > You received this message because you are subscribed to the Google Groups "ogs-devs" group.
> > > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.
> > > > > 
> > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).
> > > > > 
> > > > > ```
> 
> > > –
> > > 
> > > ```
> > > You received this message because you are subscribed to the Google Groups "ogs-devs" group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.
> > > 
> > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).
> > > 
> > > ```