# Det J is negative

**URL:** <https://discourse.opengeosys.org/t/det-j-is-negative/457>\
**Category:** ogs-users\
**Created:** [February 28, 2020, 7:23pm UTC](https://discourse.opengeosys.org/t/det-j-is-negative/457 "2020-02-28T19:23:00Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![EricT](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/e/ee7513/32.png) [@EricT](https://discourse.opengeosys.org/u/EricT)\
**Post date:** [February 28, 2020, 7:23pm UTC](https://discourse.opengeosys.org/t/det-j-is-negative/457/1 "2020-02-28T19:23:01Z")

</div>

I’m having some issues running a project file. I’m essentially running the simple square benchmark file, ‘Mechanics/Linear/square\_1e0.prj’, except I’m using a geometry and mesh I’ve made from GMSH.

When I run the file I get teh following error: det J = -15013 is negative for element 0.  
error: Please check the node numbering of the element. at NaturalCoordinatesMapping.cpp, line 115.

I suspect that there is an issue with my GMSH set up.

Thanks,

Eric

---

_[View the full topic](https://discourse.opengeosys.org/t/det-j-is-negative/457)._
