# Faults on recognizing data

**URL:** <https://discourse.opengeosys.org/t/faults-on-recognizing-data/276>\
**Category:** ogs-devs\
**Tags:** mailing-list\
**Created:** [July 21, 2016, 10:03am UTC](https://discourse.opengeosys.org/t/faults-on-recognizing-data/276 "2016-07-21T10:03:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jhonny\_Encalada](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/j/e5b9ba/32.png) [@Jhonny\_Encalada](https://discourse.opengeosys.org/u/Jhonny_Encalada)\
**Post date:** [July 21, 2016, 10:03am UTC](https://discourse.opengeosys.org/t/faults-on-recognizing-data/276/1 "2016-07-21T10:03:32Z")

</div>

Dear developers,

I have been running a model HTM. however I decided to change it to HT only. It was because the first model was not running properly. Now I have a problem when running a HT only. I deleted everything related to deformation process PCS, MUN, TIM, atc. But when I run my simulation again (HT), there is a failure in reading BC and the simulation does not progress. but if I add the old boundary conditions (H, T, M) the simulation progresses, even through PCS only shows two process (H and T). It does not make sense??

What is this problem related to?

Thanks

Jhonny

---

<div class="post-metadata">

**Author:** ![Norihiro\_Watanabe2](https://discourse.opengeosys.org/letter_avatar_proxy/v4/letter/n/e36b37/32.png) [@Norihiro\_Watanabe2](https://discourse.opengeosys.org/u/Norihiro_Watanabe2)\
**Post date:** [July 21, 2016, 10:49am UTC](https://discourse.opengeosys.org/t/faults-on-recognizing-data/276/2 "2016-07-21T10:49:38Z")

</div>

that's strange. can you send us the related input files?

-n

> **···**
>
> On 07/21/2016 12:03 PM, Jhonny Encalada wrote:
> 
> > Dear developers,
> > 
> > I have been running a model HTM. however I decided to change it to HT  
> > only. It was because the first model was not running properly. Now I  
> > have a problem when running a HT only. I deleted everything related to  
> > deformation process PCS, MUN, TIM, atc. But when I run my simulation  
> > again (HT), there is a failure in reading BC and the simulation does not  
> > progress. but if I add the old boundary conditions (H, T, M) the  
> > simulation progresses, even through PCS only shows two process (H and  
> > T). It does not make sense??
> > 
> > What is this problem related to?
> > 
> > Thanks
> > 
> > Jhonny
> > 
> > --  
> > You received this message because you are subscribed to the Google  
> > Groups "ogs-devs" group.  
> > To unsubscribe from this group and stop receiving emails from it, send  
> > an email to ogs-devs+unsubscribe@googlegroups.com  
> > \<mailto:ogs-devs+unsubscribe@googlegroups.com\>.  
> > For more options, visit [https://groups.google.com/d/optout\](https://groups.google.com/d/optout%5C).
> 
> --  
> Norihiro Watanabe, Dr.-Ing.
> 
> Department of Environmental Informatics  
> Helmholtz Centre for Environmental Research - UFZ  
> Permoserstrasse 15, 04318 Leipzig, Germany
> 
> Tel: +49 341 235 1806  
> Email: norihiro.watanabe@ufz.de
