Cam Clay Model

Mailing List Archives ogs-devs
1

Hi All,

Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.

Page:142, Section 7.3.1 to 145

Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.

Page :133, Section 7.3.1

Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

Page 180, Section 9.2

https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp

In addition, does source code of the Cam Clay model available in the Open Geosys?

Thanks in advance,

Regards,

Mohammad

Dr. Mohammad Nurul Islam

ORISE PostdoctoralResearcher

The National EnergyTechnology Laboratory (NETL)

US Department of Energy (DoE)

NETL-PGH, 84/309

Visiting Scholar

Civil and Environmental Engineering

University of Pittsburgh, USA

736 Benedum Hall,

3700 O’Hara St, Pittsburgh, PA 15213

Mobile: 1-412-3158889

Email: mni4@pitt.edu

2

Dear Mohammed,

you can find the source code here: https://github.com/ufz/ogs5

And the benchmarks here: https://github.com/ufz/ogs5-benchmarks

Best,

Lars

···

On 8 May 2017, at 22:13, Mohammad Islam wrote:

Hi All,

Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.

Page:142, Section 7.3.1 to 145

Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.

Page :133, Section 7.3.1

Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

Page 180, Section 9.2

https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp

In addition, does source code of the Cam Clay model available in the Open Geosys?

Thanks in advance,

Regards,

Mohammad

Dr. Mohammad Nurul Islam

ORISE PostdoctoralResearcher

The National EnergyTechnology Laboratory (NETL)

US Department of Energy (DoE)

NETL-PGH, 84/309

Visiting Scholar

Civil and Environmental Engineering

University of Pittsburgh, USA

736 Benedum Hall,

3700 O’Hara St, Pittsburgh, PA 15213

Mobile: 1-412-3158889

Email: mni4@pitt.edu

–

You received this message because you are subscribed to the Google Groups “ogs-devs” group.

To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

3

Dear Lars,

Thank you for your kind reply.

I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm_cc_tri_s.**. But, did not find yet the Cam Clay model source code. In ogs6, under “MaterialLib>> SolidModels>>Ehlers” is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.

I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That’s why I am interested, how it is incorporated in OGS?

Regards,

Mohammad

···

On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:

Dear Mohammed,

you can find the source code here: https://github.com/ufz/ogs5

And the benchmarks here: https://github.com/ufz/ogs5-benchmarks

Best,

Lars

On 8 May 2017, at 22:13, Mohammad Islam wrote:

Hi All,

Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives.” Springer.

Page:142, Section 7.3.1 to 145

Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions.” Springer.

Page :133, Section 7.3.1

Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

Page 180, Section 9.2

https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp

In addition, does source code of the Cam Clay model available in the Open Geosys?

Thanks in advance,

Regards,

Mohammad

Dr. Mohammad Nurul Islam

ORISE PostdoctoralResearcher

The National EnergyTechnology Laboratory (NETL)

US Department of Energy (DoE)

NETL-PGH, 84/309

Visiting Scholar

Civil and Environmental Engineering

University of Pittsburgh, USA

736 Benedum Hall,

3700 O’Hara St, Pittsburgh, PA 15213

Mobile: 1-412-3158889

Email: mn…@pitt.edu

–

You received this message because you are subscribed to the Google Groups “ogs-devs” group.

To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

4

You can find it in rf_msp_new.cpp

···

On 05/09/2017 04:20 PM, Mohammad Islam wrote:

Dear Lars,
Thank you for your kind reply.

I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm_cc_tri_s.**. But, did not find yet the Cam Clay model source code. In ogs6, under "MaterialLib>> SolidModels>>Ehlers" is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.

I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That's why I am interested, how it is incorporated in OGS?

Regards,
Mohammad

On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:

    Dear Mohammed,

    you can find the source code here: GitHub - ufz/ogs5: OpenGeoSys THM/C simulator version 5

    And the benchmarks here: GitHub - ufz/ogs5-benchmarks
    <https://github.com/ufz/ogs5-benchmarks&gt;

    Best,
    Lars

    On 8 May 2017, at 22:13, Mohammad Islam wrote:

        Hi All,
        Can any one provide a reference example of the bench mark
        problem for the Cam Clay Model used in Open GeoSys? I found
        following references:, but I am looking example of those problem

        Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S.
        (2016). "Thermo-Hydro-Mechanical-Chemical Processes in
        Fractured Porous Media: Modelling and Benchmarking
        Benchmarking Initiatives." Springer.

        >>>> Page:142, Section 7.3.1 to 145

        Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015).
        "Thermo-Hydro-Mechanical-Chemical Processes in Fractured
        Porous Media: Modelling and Benchmarking Closed-Form
        Solutions." Springer.

        >>>> Page :133, Section 7.3.1

        Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010)
        “Thermo-Hydro-Mechanical-Chemical Processes in Fractured
        Porous Media Benchmarks and Examples” Lecture Notes in
        Computational Science and Engineering, Springer.

        >>> Page 180, Section 9.2

        https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp
        <https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp&gt;

        In addition, does source code of the Cam Clay model available
        in the Open Geosys?

        Thanks in advance,

        Regards,

        Mohammad

        /Dr. Mohammad Nurul Islam/

        ORISE PostdoctoralResearcher

        The National EnergyTechnology Laboratory (NETL)

        US Department of Energy (DoE)

        NETL-PGH, 84/309

        Visiting Scholar

        Civil and Environmental Engineering

        University of Pittsburgh, USA

        736 Benedum Hall,

        3700 O'Hara St, Pittsburgh, PA 15213

        Mobile: 1-412-3158889

        Email: mn...@pitt.edu <javascript:>

        -- You received this message because you are subscribed to the
        Google Groups "ogs-devs" group.
        To unsubscribe from this group and stop receiving emails from
        it, send an email to ogs-devs+u...@googlegroups.com <javascript:>.
        For more options, visit https://groups.google.com/d/optout
        <https://groups.google.com/d/optout&gt;\.

--
You received this message because you are subscribed to the Google Groups "ogs-devs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+unsubscribe@googlegroups.com <mailto:ogs-devs+unsubscribe@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout\.

5

Dear Wang,

Thank you very much.

Regards,

Mohammad

···

On Wednesday, 10 May 2017 03:21:57 UTC-4, Wenqing Wang wrote:

You can find it in rf_msp_new.cpp

  On 05/09/2017 04:20 PM, Mohammad Islam wrote:

      Dear Lars,

Thank you for your kind reply.

      I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm_cc_tri_s.**. But, did not find yet the Cam Clay model source code. In ogs6, under "MaterialLib>> SolidModels>>Ehlers" is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.

      I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That's why I am interested, how it is incorporated in OGS?

Regards,

Mohammad

      On Tuesday, 9 May 2017 02:14:31 UTC-4, Lars Bilke wrote:

Dear Mohammed,

you can find the source code here: https://github.com/ufz/ogs5

And the benchmarks here: https://github.com/ufz/ogs5-benchmarks

Best,

              Lars

              On 8 May 2017, at 22:13, Mohammad Islam wrote:

Hi All,

                    Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

                      Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). "Thermo-Hydro-Mechanical-                          Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives." Springer.

                      >>>> Page:142, Section 7.3.1 to 145

                        Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). "Thermo-Hydro-Mechanical-                            Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions." Springer.

                        >>>> Page :133, Section 7.3.1

                          Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-                              Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

                          >>> Page 180, Section 9.2

https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp

                          In addition, does source code of the Cam Clay model available in the Open Geosys?

                          Thanks in advance,

Regards,

Mohammad

  •                                  Dr. Mohammad Nurul Islam*

                                ORISE PostdoctoralResearcher

                                The National EnergyTechnology Laboratory (NETL)

                                US Department of Energy (DoE)

                                NETL-PGH, 84/309

                                Visiting Scholar

                                Civil and Environmental Engineering

                                University of Pittsburgh, USA

                                736 Benedum Hall,

                                3700 O'Hara St, Pittsburgh, PA 15213

                                Mobile: 1-412-3158889

Email: mn…@pitt.edu

–

              You received this message because you are subscribed to the Google Groups "ogs-devs" group.

              To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.

              For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).

–

  You received this message because you are subscribed to the Google Groups "ogs-devs" group.

  To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.

  For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout).